Commonly Used Bogies

On Models and Prototype Wagons

NSWGR/SRA Types

2AE –

Used under the following vehicles: MLE, MBC, MRC

2BP – 5’6” wheelbase, 33” dia Wheels (9.5mm HO)

Used under the following vehicles: BCH, BRH, BWH, G, GM, LBH, MLE.

2BR –

Used under the following vehicles: E, TRC, MLE.

2CF – 5’6” wheelbase, 33” dia Wheels (9.5mm HO)

Used under the following vehicles: FCH, FLH, FRH, GH, GP, HGM, KLV, LLW.

Can be substituted for the 2CO, which is used under: LFW, UME, TME, LLV, BKF, PCT, GME, BMF, MLE, JME, DOT, CME, CP.

2CG – 5’9” wheelbase, 36” dia Wheels (10.5mm HO)

Used under the following vehicles: CG, HRH, PCC.

Can be converted into the XCG by removal of the clasp brakes then used under most bogie exchange vehicles.

2CH – 5’6” wheelbase, 33” dia Wheels (9.5mm HO)

Used under the following vehicles: ARX, BBX, BDL, CCX, CH, JLX, PCH, PCX, WH, WHX.

Can be converted into to XCH by removal of the clasp brakes then used under most bogie exchange vehicles.

2CL – 5’9” wheelbase, 36” dia Wheels (10.5mm HO)

Used under the following vehicles: ARX, BDX, BKX, BNX, CCX, CFX, CLX, CMX, CPX, CTS, ECX, GCX, GLX, GX, HGX, HLX, HMX, ICX, JLX, MCX, NCX, OCX, PMX, PRX, RCX, TLX, TMX, WHX and other interstate vehicles in NSW.

2CM - 6’ wheelbase, 36” dia wheels (10.5mm HO) 2CN – Same except 33” wheels (9.5mm in HO).

Used under the following vehicles: BDY, CDY, JLY, KLY, NRY, OCY, PRY, WTY or any other vehicle with code ending in ‘Y’. 2CN used on JCW and any other vehicle code ending in ‘W’.

2DB – ‘Gloucester’ 5’9” (1.75m) wheelbase, 36” (920mm) wheels (10.5mm HO)

Used under the following vehicles: NHFF, NQIW, NHRH and most other +100t capacity coal hoppers.

Interstate Types

XSC -

Used under the following vehicles: FQX, GJX, JX, SFX, VLX.

VR Aligned -

Overseas Imports

Barber S2 – 70t capacity